Toshiba e-studio 2040c Imaging Manual Download Page 53

Page: 53 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

2 - 12

2. Copier-specific Adjustments

Precautions after the completion of the adjustment

The adjustment may possibly cause offset failure, particularly when the highly colored original is copied in the

Photo mode. Therefore, carefully perform the adjustment, while checking the copy image.

Remarks

Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may cause a loss in

MFP performance, including degradation in the image quality and a reduction in the life of the consumables.

Summary of Contents for e-studio 2040c



















































































































































































































































































































































Search results

Summary of Contents for e-studio 2040c

Reviews:

Toshiba e-studio 2040c, Imaging Manual, Page: 53 / 338

Search results

Summary of Contents for e-studio 2040c

Reviews: