Toshiba DP3500, Service Handbook

Page: 34 / 257

December 2000 © TOSHIBA TEC 1 - 27 DP4500/3500 ERROR CODES AND SELF-DIAGNOSIS
0: A4/LT 1: LCF 2: Upper cassette
3: Lower cassette 4: PFP upper cassette
5: PFP lower cassette
Set if the cassette is automatically changed to the
other cassette which has the paper of the same size
when paper in the selected cassette has run out.
0: OFF
1: ON (Changed to the cassette which has the same
paper direction and size: ex. A4 to A4)
2: ON (Changed to the cassette which has the same
paper size. Paper with the different direction is ac-
ceptable as long as the size is the same: ex. A4 to
A4-R, LT-R to LT)
0: ON 1: OFF
0: ON (Motor starts rotating when original
is placed on the RADF tray or original
glass.
1: OFF
2: ON (Motor starts rotating when original
is placed on the RADF tray.
0: Motor stops (according to the setting
vaue in 08-486)
1: Motor not stopped
0: Rotated (corresponding to the setting
value in 08-489)
1: Stopped
0: 15 sec. 1: 30sec. 2: 45sec.
This setting only effective when 08-484
is set to “0”
0: 38090.55[rpm] 1: 35000[rpm]
2: 30000[rpm] 3: 25000[rpm]
4: 20000[rpm] 5: 10000[rpm]
0: Stopped
1: 10000[rpm]
Counts the total number of consumed
paper (Long size: double count)
0: Automatic density 1: Manual density
0: Text/Photo 1: Photo 2: Text
0: Display OFF 1: Display ON
0: Disabled 1: Single-sided to duplex
2: Two-sided to duplex
3: User selection
0: APS 1: AMS 2: None
Paper source priority
selection
Paper source automatic
alternation
Feeding retrying
Pre-running rotation of
polygonal motor
Auto-stop of pre-running
rotation of polygonal
motor
Rotation of polygonal
motor during the
standby state
Auto-stop timer for pre-
running rotation of po-
lygonal motor
Polygonal motor rotation
number during the
standby state
Polygonal motor rotation
in the energy saver
mode
Separation charger life
counter (enter 0 to reset
the counter)
Density mode priority
selection at power on
Copy mode priority se-
lection
Screen setting for auto-
matic energy saver/auto-
matic power off
Setting for automatic
duplexing mode
APS priority selection
ALL 0 0~5
ALL 1 0~2
ALL 0 0~1
ALL 0 0~2
ALL 0 0~1
ALL 0 0~1
ALL 0 0~2
ALL 5 0~5
ALL 0 0~1
ALL 0 0~99999999
PPC 0 0~1
PPC 0 0~2
ALL 1 0~1
EUR: 0
PPC 0 0~3
PPC 0 0~2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Setting mode (08)
Accept- Operation
Code Name Mode Default able Contents procedure
Value group
480
481
482
483
484
485
486
489
490
497
503
550
602
603
604