Toshiba BMS-CT1280UL Manual Download Page 118

Page: 118 / 167

Touch Screen Controller

Owner's Manual

-EN

You can check the current settings of the air conditioner(s) or ON/OFF unit, and set the details of the operation method.

Display the [CONTROL] tab of the air conditioner(s) or ON/OFF unit whose setting you want to
change (P.18)
When changing in group units, display the batch settings screen (P.28)

In the following procedure, the individual control screen is used to explain.

Scroll up and down to display the items you want to set/check

Set Operation Details

Tap [

-(1)

]

The option screen appears.

No.

Functions

The function name appears.

The currently set contents are displayed. If the settings are invalid, "–" is displayed.

When the settings can be changed,

is displayed. Tap to display the settings screen.

-(1)

2 3

Summary of Contents for BMS-CT1280UL







































































































































































Search results

Summary of Contents for BMS-CT1280UL

Reviews:

Related manuals for BMS-CT1280UL

Brands by name

Popular brands

Toshiba BMS-CT1280UL, Manual

Search results

Summary of Contents for BMS-CT1280UL

Reviews:

Related manuals for BMS-CT1280UL

Brands by name

Popular brands