Toshiba BMS-CT1280UL Manual Download Page 16

Page: 16 / 167

Individual control screen

The schedule set for the air conditioner or ON/OFF unit being displayed is displayed on a 24-hour time scale.

No.

Functions

You can switch the display in day-of-week units.

Displays the setting screen of Particular Timer setting.

Displays the setting screen of Week Schedule.

is displayed at the times when the schedule is set.

When operation start/stop is set, [ON] or [OFF] is displayed below

. When setting change is set,

is displayed below

. Also,

the currently displayed schedule is displayed in blue.

The schedule settings content (ON/OFF, Mode, Temp., Lock, more) is displayed.

You can switch the display to the previous or next schedule.

The times when the schedule will be executed are displayed.

The schedule setting number is displayed.

Summary of Contents for BMS-CT1280UL







































































































































































Search results

Summary of Contents for BMS-CT1280UL

Reviews:

Related manuals for BMS-CT1280UL

Brands by name

Popular brands

Toshiba BMS-CT1280UL, Manual

Search results

Summary of Contents for BMS-CT1280UL

Reviews:

Related manuals for BMS-CT1280UL

Brands by name

Popular brands