42
Connecting your TV
Connecting an amplifi er equipped with a digital
audio (optical) input
Front speaker
Signal flow
To Digital Audio
output terminal
To
Optical
type
digital audio input
Optical
digital cable
(not supplied)
Amplifier equipped with
digital audio input
PC/ HDMI 2 (A
UDIO)
Left side
of TV
You can enjoy the dynamic sound of a 2-channel
digital stereo by connecting the TV to an amplifi er
equipped with a digital audio (optical) input and
speaker system (right and left front speakers). When
using this setup, select
PCM
in the
Digital Output
menu (
-
page 26).
Connecting HDMI or DVI devices
•
When turning on your electronic components,
turn on the TV fi rst, and then the HDMI and DVI
device.
•
When turning off your electronic components,
turn off the HDMI and DVI device fi rst, and then
the TV.
•
This TV may not be compatible with features and/
or specifi cations that may be added in the future.
•
This TV is only operable with L-PCM and Dolby
Digital on 32/44.1/48 kHz. If there is no sound
when using HDMI, use the analogue audio cables
to connect the TV and the HDMI device, and
select
Analogue
in
HDMI 2 Audio
of the
AV
Connection
menu (
-
page 44).
•
This TV is able to connect with HDMI devices. But
it is possible that some HDMI devices may not
operate properly with this TV.
Connecting an HDMI or a DVI device
The HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI
device and uncompressed digital video from a DVI
device.
This input is designed to accept HDCP programme
material in digital from CEA-861-D compliant
consumer electronic devices (such as a set top box
and DVD player with HDMI and DVI output).
The HDMI input is designed for best performance
with 1080i (50 Hz/60 Hz) and 1080p (24/50/60 Hz)
high-defi nition video signals, but will also accept
and display 480i, 480p, 576i, 576p, and 720p
(50Hz/60 Hz (60 Hz: except for E-EDID)) and VGA
(VESA 640 × 480 @ 60/72/75 Hz) signals.
•
HDMI: High-Defi nition Multimedia Interface
•
DVI: Digital Video Interface
•
HDCP: High-bandwidth Digital Content Protection
•
CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth
digital content protection, which is being
standardized for reception of high-defi nition
video signals. Because this is an evolving
technology, it is possible that some devices may
not operate properly with the TV.
•
E-EDID: Enhanced-Extended Display Identifi cation
•
Acceptable PC signal format:
S-VGA:
VESA
800
5
600 @ 56/60/72/75 Hz
XGA:
VESA
1024
5
768 @ 60/70/75 Hz
W-XGA:
VESA
1280
5
768 @ 60/75 Hz
W-XGA:
VESA
1360
5
768 @ 60 Hz
S-XGA:
VESA
1280
5
1024 @ 60/75 Hz
However, these signal formats are converted to
match the number of pixels of the LCD panel.
Therefore, the TV may not display small text
properly.
If you connect this unit to your PC, the compressed
image is displayed in S-XGA mode, therefore the
picture quality may deteriorate and characters may
not be read.
•
Supported Audio format:
L-PCM, Dolby Digital, sampling rate 32/44.1/48
kHz
•
L-PCM: Linear-Pulse Code Modulation Connecting
an HDMI device
55RZ1Series1̲EN.indb 42
55RZ1Series1̲EN.indb 42
2012/04/26 17:58:04
2012/04/26 17:58:04
Summary of Contents for 55RZ1 Series
Page 65: ......
