Toshiba 55RZ1 Series, Owner'S Manual

Page: 38 / 65

38
REGZA-LINK functions
When the Enable REGZA-LINK is set to On , it allows
the following functions to be enabled by setting
them to
On .
• TV Auto Power
If a REGZA-LINK device is turned on or off , the TV
turns on or standby automatically.
• Auto Standby
If the TV is set to standby, the TV will send a
message to turn off the selected REGZA-LINK
device connected to the TV.
• Speaker Preference
From this item, you can set your audio output
preference to the TV speakers or the AV amplifi er
speakers. When this item is set to Amplifi er, the TV
remote control can be used to adjust or mute the
volume of the audio.
Notes:
• When you turn on the AV amplifi er, change its input
source, or adjust the sound volume, the sound will
be output from the AV amplifi er’s speakers even if
TV
Speakers has been selected. Turn the TV to standby
and on again to output the sound from the TV’s
speakers.
• The above functions are dependent on the
connected device and TV setting.
To set the REGZA-LINK Setup
1
From the PREFERENCES menu, press

or

to
select REGZA-LINK Setup .
3D Setup
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Auto
Teletext
Auto
Teletext Language
Panel Lock Off
4
PREFERENCES
2
Press OK , press

or

to select Enable
REGZA-LINK , then press

or

to select On .
REGZA-LINK Setup
Enable REGZA-LINK On
TV Auto Power
Auto Standby
Amplifier Control
Speaker Preference
On
On
On
TV Speakers
Note:
If you set Enable REGZA-LINK to Off , the all
other items will be greyed out.
3
Press

or

to select the REGZA-LINK Setup
item you want to use, and press

or

to
select On / Off or the desired speakers mode.
• TV Auto Power: On/Off
• Auto Standby: On/Off
• Amplifi er Control: On/Off
• Speaker Preference: TV Speakers/Amplifi er
REGZA-LINK input source selection
When any devices using CEC technology has
connected, REGZA-LINK icon shows on the input
source list.
Inputs
TV
1
2
3
HDMI 2
HDMI 1
PC
HDMI 3
HDMI 4
REGZA-LINK
To select the REGZA-LINK input source, refer to
“Selecting the video input source to view” on page
36.
Notes:
• This function depend on the devices connected.
• When the TV is switched on, it will take a few
minutes for the REGZA-LINK icon to appear in the
list; when an HDMI cable is removed, it will take a
few minutes for the icon to disappear.
• If the HDMI cable from connected device is changed
or HDMI cable from connected device setting are
changed,
Enable REGZA-LINK in the REGZA-LINK
menu may need to be reset On .
To control the REGZA-LINK device
First select the HDMI input source with the desired
REGZA-LINK device connected, then switch the
mode on the remote control to REGZA-LINK and
press the available button on the remote control
(
-
page 13).
The TV features that can be controlled by the connected
device remote control are:
Power standby, Volume, Programme channel, Sound
mute, Input selection, Number buttons, Previous
programme channel etc.
Note:
These functions are dependent on the connected
device. Not all the remote control buttons may be
available. Please refer to the owner’s manual for all the
connected devices.
Using the TV’s features
55RZ1Series1̲EN.indb 38 55RZ1Series1̲EN.indb 38 2012/04/26 17:58:03 2012/04/26 17:58:03