Toro Z Master Professional 7000 Series, Operator'S Manual

Page: 65 / 364

g005911
Figure 86
1. Ratchet with short
extension or breaker
bar 3. Spring-loaded idler pulley
2. 16.5 cm (6-1/2 inches)
between the spring hooks
4. Fixed Idler pulley
12. While holding the belt in tension, tighten the 2
bolts that secure the fixed idler arm.
13. Remove the ratchet or breaker bar from the
square hole in the fixed idler arm.
14. Install the belt covers with the tabs in the slots.
Install the screws and close the latches (
Figure
87 ).
g012506
Figure 87
1. Belt cover 3. Bolt
2. Latch 4. Install tab into the slot
15. Install the sheet-metal guard; refer to Removing
the Sheet-Metal Guard (page 42) .
16. Tighten the bolt for the mower-deck curtain; refer
to
Releasing the Mower-Deck Curtain (page 42) .
17. Check the tension on the drive belts.
63