Toro Z Master Professional 7000 Series, Operator'S Manual

Page: 54 / 364

g007169
Figure 67
1. Drain valve 3. Back of machine
2. Water separator
Changing the Fuel Filter
Never install a dirty fuel filter if it is removed from the
fuel line.
1. Allow the machine to cool down.
2. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Close the fuel shut-off valve ( Figure 68 ).
5. Loosen the 2 hose clamps and disconnect the
fuel lines from the fuel filter (
Figure 68 ).
6. Install a new filter. Connect the fuel lines to the
fuel filter and install the 2 hose clamps (
Figure
68 ).
7. Open the fuel shut-off valve.
8. Start the engine and check for leaks.
g007697
Figure 68
1. Fuel filter 4. Left side of machine
2. Hose clamp 5. Fuel-shutoff valve
3. Fuel pump
Servicing the Fuel Tank
Do not attempt to drain the fuel tank. Ensure that an
Authorized Service Dealer drains the fuel tank and
services any components of the fuel system.
52