Toro Z Master Professional 7000 Series, Operator'S Manual

Page: 18 / 364

Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (
Figure 7 ).
g008950
Figure 7
1. Fuel gauge (bars) 4. Safety-interlock symbols
2. Battery light 5. Low fuel indicator light
3. Hour meter
Safety-Interlock Indicators
There are symbols on the hour meter that indicate
with a black triangle that the interlock component is
positioned correctly (
Figure 7 ).
Battery-Indicator Light
If you turn the key switch to the O
N
position for a
few seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when the key switch is
turned on and when the charge is below the correct
operating level (
Figure 7 ).
Glow-Plug Light
The glow-plug indicator light turns on when the
glow-plug button is engaged (
Figure 6 ).
Glow-Plug Switch
This switch activates the glow plugs and is indicated
by the glow-plug light. Hold down the glow-plug switch
for 10 seconds prior to starting the machine.
Temperature Light
The temperature light comes on when the engine is
overheating (
Figure 6 ).
Audible Alarm
This machine has an audible alarm that alerts the user
to shut off the engine; otherwise, engine damage can
occur from over heating. Refer to
Operating with the
Overheat Sensor (page 33) .
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction (
Figure 4 ).
Fuel-Selector Valve
The fuel-selector valve is located behind the seat.
Close the fuel-selector valve when transporting or
storing the machine.
Move the selector valve to the left or right position for
operation.
Neutral-Lock Position
Move the motion-control levers outward from the
center to the N
EUTRAL
-
LOCK
position when exiting
the machine ( Figure 25 ). Always position the
motion-control levers into the N
EUTRAL
-
LOCK
position
when you stop the machine or leave it unattended.
Parking-Brake Lever
Whenever you shut off the engine, engage the parking
brake to prevent accidental movement of the machine.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
16