Toro Workman 3000 Series, Service Manual

Page: 62 / 306

Workman 3300–D/4300–D
Page 4 – 20
Briggs/Daihatsu Diesel Engine
Engine Throttle Bracket
Figure 14
1. Engine
2. Lock
nut
3. Cap screw
4. Cap screw
5. Lock nut
6. Lock nut
7. Ball joint
8. Jam nut
9. Threaded rod
10. Accelerator cable
11. Return spring
12. Shoulder bolt
13. Grease fitting
14. Throttle bellcrank
15. Throttle bracket
16. Engine mount
FRONT
RIGHT
1
4
7
13
14
2
3
5
7
6
9
8
11
10
5
5
12
15
16
Disassembly (Fig. 14)
1. Remove throttle bracket components from engine as
needed using Figure 14 as a guide.
Assembly (Fig. 14)
1. Install removed throttle bracket components to en-
gine using Figure 14 as a guide.
2. Lubricate bellcrank grease fitting after assembly.
3. Check operation and adjustment of accelerator
cable (see Operator’s Manual). If needed, adjust accel-
erator cable.
4. Check engine speed (both idle and high idle) and ad-
just if necessary (see Adjust Engine Speed in Adjust-
ments section of this chapter)