Toro Workman 3000 Series, Service Manual

Page: 119 / 306

NOTE: The thickest shim of the shim set (Item 2) should
be positioned against the snap ring (Fig. 95).
21.Insert tabbed shim (Item 4) against the bearing. In-
sert shim set (Item 2) against the tabbed shim. Use
thickest shims in set possible, that will permit installation
of the snap ring. (Fig. 95 and 96).
1
3
2
4
Figure 95
5
22.Install snap ring into the groove of the bearing hous-
ing (Fig. 96 and 97).
1 3
4
2
6
Figure 96
1. Countershaft 4. Snap ring
2. Bearing
5. Center plate
3. Shims 6. Sealing cap
Figure 97
Drive T
rain
Workman 3000/4000 Series Page 6 – 47 Drive Train