Toro Workman 3000 Series, Service Manual

Page: 52 / 306

Workman 3300–D/4300–D
Page 4 – 10
Briggs/Daihatsu Diesel Engine
Fuel Tank
Figure 6
1. Fuel tank
2. Fuel tank cap
3. Gasket
4. Fuel
sender
5. Lock washer (5 used)
6. Screw (5 used)
7. Hex
nut
8. Lock washer
9. Spacer
10. Wire harness lead
11. Fuel fitting
12. Hose clamp
13. Fuel hose (to fuel filter)
14. Clamp
15. Flange nut (2 used)
16. Flange nut (2 used)
17. Fuel hose (return from engine)
18. Hose clamp
19. Fitting
20. Bushing
21. Rear fuel tank support
22. Cap screw (2 used) 23. Lock nut (2 used)
24. Front fuel tank support
25. Socket head screw (2 used)
26. Fuel tank strap (2 used)
27. Felt strap (2 used)
28. Cap screw (2 used)
29. Hose clamp
30. Fitting
31. Fuel filter/water separator
32. Fitting
33. Fuel hose (to engine)
FRONT
RIGHT
8
7
6
9
1
5
4
3
2
17
16
15
18
10
14
13
12
11
20
21
19
22
23
Thread Sealant
24
Sender
Ground
Wire
25
26
27
28
29
32
30
33
31
13
29
DANGER
Because diesel fuel is highly flammable, use cau-
tion when storing or handling it. Do not smoke
while filling the fuel tank. Do not fill fuel tank
while engine is running, hot, or when vehicle is in
an enclosed area. Always fill fuel tank outside
and wipe up any spilled fuel before starting the
engine. Store fuel in a clean, safety–approved
container and keep cap in place. Use fuel for the
engine only; not for any other purpose.
Check Fuel Lines and Connections
Check fuel lines and connections periodically as recom-
mended in the Operator’s Manual. Check lines for dete-
rioration, damage, leaks, or loose connections. Replace
hoses, clamps, and connections as necessary.