Toro Workman 3000 Series, Service Manual

Page: 116 / 306

Workman 3000/4000 Series Page 6 – 44 Drive Train
13.Assemble shift arms:
A. Install 3 new oil seals (Item 14) onto transaxle
case. Apply multi–purpose grease on lips of oil seals
before installing.
B. Install 3 keeper plates (Item 13) and tighten 3 cap
screws (Item 12) to a torque from 11 to 13 ft–lb (15 to
17 N–m).
C. Apply Loctite #680 (or equivalent) to threads and
tapers of shift fork arms.
D. Install 2 shift arms (Item 11). Install shift arm as-
sembly (Items 8, 7, 6, 5, 4, 3).
E. Install washers (Items 10 and 2) and locknuts
(Items 9 and 1). Tighten shift arm retaining locknuts
to a torque from 200 to 280 in–lb (22.6 to 31.6 N–m).
14.Install oil cap (Item 1) with O–ring. Apply multi–pur-
pose grease to O–ring.
15.If removed, install air breather (Item 2). Use sealing
tape on threads of air breather.
8
5
7
6
4
3
9
10
11
1
2
Apply Loctite 680
to threads and tapers
9
10
11
200 to 280 in–lb
200 to 280 in–lb
(22.6 to 31.6 N–m) (22.6 to 31.6 N–m)
Figure 85
12
13
14
Figure 86
2 1
Figure 87