4-4
7) Press the [EDIT/CAL] key. The Edit/Cal menu appears.
8) Press the [CAL] key. The calibration menu appears.
9) Press the [TEMP CAL] key. The probe selection screen appears.
10) Using [MARK/CLR] and the down arrow key as necessary, mark the probes to be
calibrated. A marked probe is indicated with an asterisk on the left. (Note that the
"Refer Tmp" cannot be marked and is displayed for reference only.)
CAL
EDIT
PRNT
REPT
DONE
TEMP
CAL
PRES
CAL
FLOW
CAL
DONE
Count Deg C
_Satur Tmp
PrSat Tmp
Expan Tmp
Chamb Tmp
Refer Tmp
MARK
/CLR
EXIT
QUIT
OK
