Benchtop Serial I/O
7/30/2015 3:30 PM
Page 13
Change Flow Rate Setpoint
FS=
Description
Changes the Flow Rate setpoint to a given value.
Prerequisites
Requires Benchtop firmware revision 1.05 or greater.
Syntax
FS=
setpoint
Parameters
setpoint
The
setpoint
value is the Flow rate, in L/min
only
, that the system
should control at.
Remarks
Data Returned
None. The only response is a carriage return/linefeed terminator.
Examples
The
FS=
setpoint
command is used to set the Flow Rate to 15 L/min.
computer sends
FS=15
<CR>
benchtop responds
<CR><LF>
The
<CR><LF>
response signifies completion of the command.
