THOR-SSM
96
Rev. : 02/09/2012
Indicator LEDs
In the ‘Dual-head- KVM- Switch’ operating mode, the following indicator LEDs are used:
Meaning of the diagnostic LEDs:
LED
Appearance
Diagnostics
Power LED
(Red LED)
Off
On
Device not ready
Device ready
Link Status
(Orange LED)
Off
Orange On
Orange Blinking
Green On
Green blinking
No transmission over the CATx- cable
attached local/remote unit is disconnected,
switched off or a broken interconnect cable
Connection through CATx cable is OK
Actual CPU selected by push button (
only type
KVM- Switch
)
active path (
only type KVM- Switch
)
the active path has no connection through the trunk
cable (
only type KVM- Switch
)
Diagnostic LED
Link Status
Lower connector
Diagnostic LED
Link Status
Upper connector
