THOR-SSM
Rev. : 02/09/2012
87
Operation
The following operations are possible in the operating mode ‘Single-head KVM- Switch’:
a) By push-button:
The device switches to the next channel with each key press. The changeover will only be
executed if the push-button is not operated for longer than 2 seconds. With each key press,
the display will switch to the next channel as indicated by a rapidly blinking LED. If the last
channel is reached, the device will cycle to the first channel.
b) By serial interface
You can find the allocation of the serial interface under
“Serial Interface”
on page
145
. A
standard cable (RJ45 / DB9) to the CPU is included in delivery.
For the complete communication protocol and an explanation of the control characters please
see
Appendix E: Protocol for command mode
For communication please set up the format of the serial data communication to:
115.2K, 8, 1, NO
(115.2 KBAUD, 8 Data bit, 1 Stop bit, NO parity)
Push-button
Serial Interface
(RS232)
