THOR-SSM
98
Rev. : 02/09/2012
Control commands
In the Dual-head KVM- Switch operating mode, the following control commands are
allowed:
•
STX, 0x40, 0x80, ETX
Acknowledgement of the system info
•
STX, 0x45, ETX
Reset on factory settings
•
STX, 0x54, ETX
Reset the KVM- Switch
•
STX, 0x4F, 0x81, <Loc-No>, ETX
S
witch (Local-)input to (Remote-)output,
existing connection is disconnected at the
same time
There are:
< Loc-No>
7Bit date 1 to 7
Examples:
STX, 0x54, ETX
Reset the switch and set the connections as a function of
SW7 (see above).
STX, 0x40, 0x80, ETX
Read the system info (version number) from the switch.
STX, 0x4F, 0x81, 0x81, ETX
Switch console (Remote Unit) to (Local Unit) at CPU 1.
(At the same time the port for the second monitor is also
switched).
STX, 0x4F, 0x81, 0x83, ETX
Switch console (Remote Unit) to (Local Unit) at CPU 3
(Existing connection of CPU 1 is disconnected. At the
same time the port for the second monitor is also
switched).
STX, 0x54, ETX
Reset the switch and set the connections as a function of
SW7 (see above).
