THOR-SSM
Rev. : 02/09/2012
71
Setup
There are no other setups available in ‘Multiplex-Repeater’ operating mode.
Operation
In operating mode ‘Multiplex-Repeater’ the following operations are possible:
By serial interface
You can find the allocation of the serial interface under
“Serial Interface”
on page
145
. A
standard cable (RJ45 / DB9) to the CPU is included in delivery.
For the complete communication protocol and an explanation of the control characters please
see
Appendix E: Protocol for command mode
For communication, please set up the format of the serial data communication to:
115.2K, 8, 1, NO
(115.2 KBAUD, 8 Data bit, 1 Stop bit, NO parity)
Control commands
In the ‘Multiplex-Repeater’ operating mode, the following commands are allowed:
•
STX, 0x40, 0x80, ETX
Acknowledgment of the system information
•
STX, 0x54, ETX
Reset of the Multiplex- Repeater
Serial Interface
(RS232)
