THOR-SSM
80
Rev. : 02/09/2012
Operation
The following operations are possible in the ‘Crosspoint-Switch’ operating mode:
a) By push button:
With the first key press, the macro display is switched on. The LED with the number of the
active selected macro flashes green. With each key press, the display will switch to the next
LED. With each key press, the next macro stored in the device is called and the programmed
switching configuration is loaded. The macro will only be executed if the push button is not
operated for longer than 2 seconds. If the push button is released for longer than 2 seconds,
the operation is cancelled. The selection of a not (yet) programmed macro will be interpreted
as a reset (see below).
b) By serial interface
You can find the allocation of the serial interface under
“Serial Interface”
on page
145
. A
standard cable RJ45 / DB9 to the CPU is included in delivery.
For the complete communication protocol and an explanation of the control characters please
see
Appendix E: Protocol for command mode
Push-Button
Serial Interface
(RS232)
