THOR-SSM
30
Rev. : 02/09/2012
3.3 System Setup
To install your THOR Small Switch system:
1.
Switch off all devices.
2.
Connect your keyboard, monitor(s) and mouse to the Remote Unit (depending on device
type).
3.
Connect the CPU/signal source to the Local Unit using the supplied cable(s).
4.
Connect the devices with INTERCONNECT cables (fiber or CATx)
5.
Take the THOR Small Switch out of the packaging and also the sheet with the product
stickers.
6.
According to your application, peel the corresponding sticker from the sheet and stick it
on the top panel:
7.
Use the associated stickers to label the interface ports:
