THOR-SSM
Rev. : 02/09/2012
55
5.2 THOR Small Switch for CATx
Each THOR Small Switch is fitted with two indicator LEDs:
Power
and
Link Status:
The
Power
LED is next to the Power socket. The
Link Status
LED is located between the lower
and upper fiber connector. The LED shows the status for the lower interconnection, the
____
LED for the upper interconnection.
The position of the LEDs is shown below
:
Diagnose- LEDs on THOR Small Switch for Fiber
LED
Appearance
Diagnostics
Power LED
(Red LED)
Off
On
Device not ready
Device ready
Link Status
(Orange LED)
Off
Orange On
Orange Blinking
Green On
Green Blinking
No transmission over the fiber- cable
attached local/remote unit is disconnected, switched
off or a broken interconnect cable
Connection through fiber cable is OK
Actual CPU selected by push button (
only type
KVM- Switch
)
active path (
only type KVM- Switch
)
the active path has no connection through the trunk
cable (
only type KVM- Switch
)
Diagnostic LED
Power
Diagnostic LED
Link Status
Lower connector
Diagnostic LED
Link Status
Upper connector
