THOR-SSM
Rev. : 02/09/2012
103
7.5 System info
System information can be read out over the serial interface in all four operating modes.
The location of the serial interface is shown below:
You can find the allocation of the serial interface under
“Serial Interface”
on page
145
. A
standard cable (RJ45 / DB9) to the CPU is included in delivery.
For the complete communication protocol and an explanation of the control characters please
see
Appendix E: Protocol for command mode
For communication, please set up the format of the serial data communication to:
115.2K, 8, 1, NO
(115.2 KBAUD, 8 Data bit, 1 Stop bit, NO parity)
Control command
Use the following command in any operating mode to transfer the system information:
•
STX, 0x40, 0x80, ETX
Acknowledgement of the system info
Available Information
The following information is transferred:
Fri July 27 14:04:00 2007
THOR.hex
Serial Interface
(RS232)
