THOR-SSM
66
Rev. : 02/09/2012
7. Operating Modes
7.1 Multiplex- Repeater
The DVI signals (and optional audio) originating from a signal source are distributed and
extended – depending on the configuration – on up to 7 equivalent outputs. The signals of the
CPU (signal source) are transmitted to a Local Unit which is attached to the THOR Small
Switch by CATx cables. The transmission between the THOR Small Switch and up to 7
Remote Units is also done by CATx cables. Optionally, instead of Remote Units, further
THOR Small Switches can be installed for a second stage of distributors. Further Remote
Units can be connected to the second stage repeaters, allowing up to 49 display units to be
controlled.
The distance between a Local Unit and THOR Small Switch or between a THOR Small
Switch and Remote Unit or between two THOR Small Switches may amount to, in each case,
up to 140m allowing installations in distributed applications.
Configuration ‘Multiplex-Repeater’ –
1 Source up to 7 Displays
A single signal from a Local Unit is distributed on up to 7 outputs and transferred over
CATx- cables on up to 7 Remote Units. Using a second stage of Multiplex Repeaters, up to
49 monitors can be supplied with video (and optionally audio).
Connect to the THOR
Media Remote Units
Push-button, no function
in this operating mode
R
L
R
R
R
R
R
R
Connect to the THOR
Media Local Unit
Connect to the THOR
Media Remote Units
Connect to 5V power
supply
