Kalypso Reference Manual
375
Menu Organization
Logic for this group of buttons includes two parameters: an on/off for the
rotation and a mode selection. Pressing
Rotate
turns the rotation off or on.
Pressing any other button sets the mode parameter. Making a selection
returns to the parent menu.
Wipe Modulation Waveform Menu
This menu selects the mode for pattern modulation. With the
Trans
delega-
tion selected, press either
H:
↓
↓
↓
↓
or
V:
↓
↓
↓
↓
to access this menu.
Logic for this group of buttons has two parameters: an on/off for the mod-
ulation, and a waveform selection. Pressing
On
turns the modulation on if
it was off, and off if it was on. After turning it on, pressing any other button
sets the waveform parameter. Making a pattern selection returns to the
parent menu. Directly pressing a modulation button turns the modulation
on if it was off and sets the waveform parameter. If modulation is turned
off, the selected waveform shape selection is retained (but not active), for
use later if modulation is turned back on.
Keyer Wipe Generator Adjust Menus
This set of menus adjusts the keyer wipe generator. Keyer wipe generators
are a subset of the complex wipe generators and those controls present in
this menu are equivalent to those described for the complex generator.
With a KeyWipe generator type selected, press
GenAdj
↓
↓
↓
↓
to access this menu.
Keyer Box Generator Adjust Menus
With a Box generator type selected, press
GenAdj:
↓
↓
↓
↓
to access this menu.
Left
,
Right
,
Top
, and
Bottom
adjust the box generator’s left, right, top and
bottom edge positions, respectively.
Figure 266.
M/E 1 C1 modulation waveform
Enable
Tri
Sq
Sine
Saw
Figure 267.
Pat
Rot Ang
Aspect
Pos:Off
↓
↓
↓
↓
Rot:An
↓
↓
↓
↓
Aspect
Figure 268.
Left
Right
Top
Bottom
Soft
