THOMSON Grass Valley Kalypso Classic, Reference Manual

Page: 372 / 404

372 Kalypso Reference Manual
Section 4 — 1-M/E Panel Built In Menu
Wipe Direction Menu
This menu sets the direction of the wipe. Press the
Dir:
↓ ↓ ↓ ↓
button to access this
menu.
Norm
and
Rev
are a radio group. The top line of this menu indicates the point
of use being affected. Making a selection changes the source and leads back
to the parent menu.
Generator Select Menu
This menu selects the generator used as the source for a wipe, mask or
wash point of use. Press the
Gen:
↓ ↓
↓ ↓
button to access this menu. Different gen-
erator selections are possible for different points of use, so the menu layout
varies accordingly.
For all keyer points of use (preset pattern, matte wash, border/borderline
wash) the menus in
Figure 258 and Figure 259 are displayed.
More
goes to
the next menu page, changing the selections displayed. The middle four
selections are available in both pages. All buttons displayed on this two
page menu are a radio group. The top line of this menu indicates the point
of use being affected. If more than one point of use is delegated for control,
this line reads
Multiple Delegations
. Making a selection changes the source
and leads back to the parent menu.
For transition wipe and transition wipe border wash points of use, the
menu is similar to that above except that there are only four selections and
therefore a second page does not exist (
Figure 260 ).
Figure 257.
M/E 1 Transition Wipe 1 direction
Normal Reverse
Figure 258.
M/E 1 Key 2 Pst Pat Border Wash
Box KeyWipe C1 C2 U1
Figure 259.
M/E 1 Key 2 Pst Pat Border Wash
KeyWipe C1 C2 U1 U2
Figure 260.
M/E 3 Transition Wipe 1
C1 C2 U1 U2