background image

328

Kalypso Reference Manual

Section 3 — Menus

 

M/E Menus

M/E Mode Menu

The M/E Mode menu can be used to select different M/E operating modes, 
including programmable clean feeds. The menu is accessed by touching 

M/E

Mode

 (

Figure 226

). 

Figure 226.  M/E Mode Menu

In 

Normal

 operating mode an M/E provides a main program output, a 

preview output, and a totally clean feed output (no keys). 

In 

Prog CF

 operating mode an M/E can provide four different outputs (A, B, 

C, and D), as well as preview. Each of these outputs can include different 
keyers. In 

Figure 226

 PGM PST has been delegated for control. Its A 

program output contains all four keyers, while the D program output has 
none (a standard clean feed). However, program output B contains only 
Key 1 and Key 2, and program output C contains only Key 3 and Key 4. 
This creates one main and three different subfeeds all output simulta-
neously from the same M/E. Programmable clean feed is useful for 
branding two or more feeds with different keyed logs. 

Summary of Contents for Grass Valley Kalypso Classic





















































































































































































































































































































































































































Reviews: