TI120 Series Variable Frequency Drive
Detailed parameter introduction
- 129 -
Set the local communication address, 0 stands for broadcast address, the address range for normal
communication is 1~247.
P50.01
Communication rate selection
range:0x00~0x55
Factory default:31
Ones: communication baud rate of terminal port
Tens: communication baud rate of keyboard port
0:4800bps
1:9600bps
2:19200bps
3:38400bps
4:57600bps
5:115200bps
P50.02
Data format
range:0x00~0x55
Factory default:00
Ones: Terminal port data format
Tens: Keyboard port data format
0:1-8-1-N format, RTU
1:1-8-1-E format, RTU
2:1-8-1-O format, RTU
3:1-7-1-N format, ASCII
4:1-7-1-E format, ASCII
5:1-7-1-O format, ASCII
P50.03
Local response delay
range:0.000s~60.000s
Factory
default:0.000s
Delay time for answering host communication.
P50.04
Overtime detection time
range:0.0s~600.0s
Factory default:0.0s
It is used for communication timeout detection, 0.0s: mean no detection.
P50.05
Selection of communication
error response shield
range:0x00~0x11
Factory default:00
Ones: selection of terminal port error response shield
Tens: selection of keyboard port error response shield
0: valid
1: invalid
P50.06
Master-slave mode selection
and slave function code setting
range:0x0000~0x1122
Factory default:0000
Ones: master-slave selection for terminal port communication
Tens: master-slave selection for keyboard port communication
0: stand-alone use
1: this machine is used as the host
2: this machine is a slave machine
Hundreds: operation address of terminal port communication