TI120 Series Variable Frequency Drive
Detailed parameter introduction
- 97 -
enter DC braking.
30: stop DC braking
When the variable frequency drive receives the stop command, and this terminal function is valid,
when the output frequency is lower than the setting value of the DC braking start frequency P01.11, it
starts to enter DC braking.
31: running DC braking
When the variable frequency drive receives the start command and this terminal function is valid,
the variable frequency drive performs DC braking and starts from the starting frequency.
32: pulse input (X7/HDI support high speed)
The input high-speed pulse signal is used as the frequency setting. For the corresponding
relationship between the high-speed pulse frequency and the setting frequency, refer to P12.33~P12.36
function codes.
33: count input
To realize the function in counting process and count the input signal, please refer to the parameter
description of P43.00~P43.01.
34: count clearing
Clear the counting value of the count input function.
35: length counting
It is suitable for functions requiring length calculation. For specific length calculation and setting,
please refer to P43.02~P43.04 parameter description.
36: length clearing
Clear the calculated length value of the length counting.
37: PID action direction
When the terminal function is valid, the PID action direction is opposite to the action direction set by
P40.12.
38: PID parameter switching
When P40.09=2, and the terminal function is valid, it is switched to the second group of PID
parameters P40.06~P40.08, and when the terminal function is invalid, it is restored to P40.03~P40.05.
39: PID operation suspending
When the terminal function is valid, the PID stops the adjustment and maintains the current PID
output. When the terminal is invalid, the PID adjustment function is restored.
Output frequency
Time
PID Pause signal
ON
