TI120 Series Variable Frequency Drive
Detailed parameter introduction
- 123 -
P41.12
Multistage frequency digital
given 13
range: P00.09~P00.08
Factory
default:0.00Hz
P41.13
Multistage frequency digital
given 14
range: P00.09~P00.08
Factory
default:0.00Hz
P41.14
Multistage frequency digital
given 15
range: P00.09~P00.08
Factory
default:0.00Hz
16-speed switching can be achieved through different combinations of switching value input
terminals "multi-stage frequency terminal 1-4". For the specific setting method, refer to the content of the
switching value input terminal.
P40.15
Setting method of multistage
frequency 1
range:0~9
Factory default:0
0: given by P41.00
1: analog input AI1
2: analog input AI2
3: reserve
4: Min[AI1,AI2]
5: Max[AI1,AI2]
6: Sub[AI1,AI2]
7: Add[AI1,AI2]
8: pulse given HDI
9: process PID
It is used for selecting the frequency setting source for multi-stage frequency 1.
P42 Simple PLC
The simple PLC function is to automatically switch the actual operating conditions of the variable
frequency drive according to the frequency and time set by the user so as to meet the technological
requirements.
The process is as shown in the figure: