![background image](http://html1.mh-extra.com/html/thermofisher-scientific/vanquish-vc-d11/vanquish-vc-d11_operating-manual_1105629070.webp)
5
•
Installation
Page 70
Diode Array/Multiple-Wavelength Detectors (VC-D11, VC-D12, VF-D11)
Operating Manual
Tubing brackets are available for holding the tubing in place. Slip the
bracket side onto the drain pipe.
Figure 16: Tubing bracket (left), tubing bracket installed (right)
Dual System Arrangements
The number of tubes may exceed the capacity that the tubing guides can
hold. In this case, it is recommended to place the solvent lines in the
tubing guides and route any additional tubes freely in the tubing chase.
Guide Holes and Capillary Clips
Guide holes and capillary clips are provided at specific positions on the
system modules. Route flow connections from one module to the next
module in the Vanquish system through the appropriate guide hole or
capillary clip when instructed to do so in the manual.
5.8.3
Installing the Partition Panel Plugs
There are two types of partition panel plugs available in the detector
ship kit.
Figure 17: Plugs available for the partition panel
No.
Description
1
Plug with slit, for guiding capillaries with small outer diameter, such as
uninsulated capillaries.
2
Rotating plug, for guiding capillaries that do not fit in the plug with slit,
including insulated capillaries.