![background image](http://html1.mh-extra.com/html/thermofisher-scientific/vanquish-vc-d11/vanquish-vc-d11_operating-manual_1105629057.webp)
5
•
Installation
Diode Array/Multiple-Wavelength Detectors (VC-D11, VC-D12, VF-D11)
Operating Manual
Page 57
5.5.2
Connecting the Device
Device Connectors
The following connectors are provided on the device:
Figure 8: Electrical connectors on the right side of the device
No.
Description
1
Rating plate, indicating the serial number, part number, module name,
revision number (if any), line and fuse rating, and the manufacturer's address
2
Main power switch (on/off control)
3
Fuse holder
4
Power inlet connector
5
System Interlink port
Allows power on/off control for the device from the Vanquish system base and
device communication and synchronization between the detector and other
modules in the Vanquish system.
For example, the interconnection between autosampler and detector
automatically enables direct synchronization of sample inject and data
acquisition start in the detector. As a result, the synchronization improves the
retention time reproducibility.
6
USB hub ("A" type connector)
Allows connection to other modules in the Vanquish system