manualshive.com logo in svg

ThermoFisher Scientific Vanquish VC-D11, Operating Manual, Page: 52 / 192

Share
Download
ThermoFisher Scientific Vanquish VC-D11 Operating Manual Download Page 52

5

 • 

Installation

Page 52

Diode Array/Multiple-Wavelength Detectors (VC-D11, VC-D12, VF-D11) 

Operating Manual

6.

Recommended

:

Perform Instrument Installation Qualification.

In the Chromeleon software, a wizard is available to guide you
through the qualification process. On the 

Chromeleon 7 Console

:

Click 

Tools > Instrument Qualification > Installation Qualification

.

Follow the instructions in the 

Instruments Installation Qualification

Operating Instructions

. The manual provides information about the

required materials and detailed instructions.

NOTICE

If the device is operated with another data system, refer to the
documentation for the software that you are using and/or perform the
qualification manually. The 

Instruments Installation Qualification

Operating Instructions

 provide information about the parameters to be

adapted and the required settings.

7.

Recommended

: Perform Operational Qualification.

The qualification kit includes all materials required for the
qualification and detailed instructions.

Moving the Device after Installation

If you have to move the device after it has been set up and installed in
the Vanquish system, prepare the device for transport and move it to
the new location. Follow the instructions in 

Transporting or Shipping the

Device (

}

 page 148)

.

Summary of Contents for Vanquish VC-D11

































































































































































































Reviews:

No comments