manualshive.com logo in svg

Thermo 49i, Instruction Manual, Page: 87 / 276

Share
Download
Thermo 49i Instruction Manual Download Page 87

Operation

Diagnostics Menu

Thermo Fisher Scientific

Model 49

i

 Primary Standard Instruction Manual

3-57

Set Analog Outputs

The Set Analog Outputs screen contains three choices: Set to full-scale, set 
to zero, or reset to normal. Full-scale sets the analog outputs to the full-scale 
voltage, zero sets the analog outputs to 0 volts, and normal operation. The 
example below shows the selected output state “ALL” is set to normal.

•

In the Main Menu, choose Diagnostics > Test Analog Outputs > 

ALL, 

Voltage Channel 1-6, 

or

 Current Channel 1-6

.

•

Press 

 

or 

 to set output.

•

Press 

 to reset to normal.

Instrument Configuration

The Instrument Configuration screen displays information on the hardware 
configuration of the calibrator.

Note 

If the calibrator is in service mode, pressing 

 

on the item will 

toggle it yes or no (with the exception of purchased options such as dilution 
and auto calibration). 

•

In the Main Menu, choose Diagnostics > 

Instrument Configuration

.

•

Press

 

 to toggle instrument configuration (in service mode only).

                           

                           

SET ANALOG OUTPUTS:        

 SETTING:             ALL  

 OUTPUT SET TO:     NORMAL 

©

 SET TO FULL SCALE       

ª

 SET TO ZERO             

§

 RESET TO NORMAL         

                           

 RANGE  AVG   DIAGS ALARM  

INSTRUMENT CONFIGURATION:
>I/O EXPANSION BOARD  YES

 RANGE  AVG   DIAGS ALARM

Summary of Contents for 49i





















































































































































































































































































Reviews:

No comments