C-Link Protocol Commands
Datalogging
Thermo Fisher Scientific
Model 49
i
Primary Standard Instruction Manual
B-23
Note
Issuing these commands will clear all the logging data memory. All the
existing records should be retrieved using appropriate commands, if
required.
Send:
set malloc lrec 10
Receive:
set malloc lrec 10 ok
set copy sp to lrec
set copy sp to srec
set copy sp to stream
These commands copy the current selections in scratch pad (sp) into the
long record, short record, or streaming data list. The example that follows
copies the current list in scratch pad into the long records list.
Send:
set copy sp to lrec
Receive:
set copy sp to lrec ok
set copy lrec to sp
set copy srec to sp
set copy stream to sp
These commands copy the current contents of the long record, short record,
or streaming data list into the scratch pad (sp). These commands are useful
in easy modification of current long record, short record, or streaming data
lists. The example that follows copies the current list of long records into
the scratch pad.
Send:
set copy lrec to sp
Receive:
set copy lrec to sp ok
sp field
number
This command reports the variable
number
and name stored at index in the
scratch pad list. The example that follows shows that the field 5 in the
scratch pad is set to index number 11, which is for the variable pres.
Send:
sp field 5
Receive:
sp field 5 11 pres
set sp field
number value
number =
1-32 is the maximum number of fields in long and short record
lists.
number =
1-18 is for streaming data lists.
This command sets the scratch pad field
number
(item number in scratch
pad list) to
value
,
where v
alue
is the index number of a variable in the analog
out variable list. Available variables and their corresponding index numbers
may be obtained using the command “list var aout”. The “set sp field”