manualshive.com logo in svg

Thermo 49i, Instruction Manual, Page: 34 / 276

Share
Download
Thermo 49i Instruction Manual Download Page 34

Operation

Software Overview

3-4

Model 49

i

 Primary Standard Instruction Manual

Thermo Fisher Scientific

Soft Keys

The Soft Keys are multi-functional keys that use part of the display to 
identify their function at any moment. The function of the soft keys allow 
immediate access to the menu structure and most often used menus and 
screens. They are located directly underneath the display and as the keys' 
functions change this is indicated by user-defined labels in the lower part of 
the display, so that the user knows what the keys are to be used for.

To change a soft key, place the menu cursor “>” on the item of the selected 
menu or screen you wish to set. Press 

 

followed by the

 

selected soft key 

within 1 second of pressing the right-arrow key. The edit soft key prompt 
will be displayed for configuration for the new label.

Note 

Not all menu items may be assigned to soft keys. If a particular menu 

or screen item cannot be assigned, the key assignment screen will not come 
up upon entering right-arrow-soft key combinations. All items under the 
Service menu (including the menu itself ) cannot be assigned soft keys. 

Software Overview

The Model 49

i

 Primary Standard utilizes the menu-driven software 

illustrated by the flowchart in Figure 3-3. The Power-Up screen, shown at 
the top of the flowchart, is displayed each time the instrument is turned on. 
This screen is displayed while the instrument is warming up and performing 
self-checks. After the warm-up period, the Run screen is automatically 
displayed. The Run screen is the normal operating screen. It displays the O

3

 

concentration, depending on operating mode. From the Run screen, the 
Main Menu can be displayed by pressing 

. The Main Menu contains 

a list of submenus. Each submenu contains related parameters and/or 
functions. This chapter describes each submenu and screen in detail. Refer 
to the appropriate sections for more information.

EDIT SOFT KEY PROMPT:
 CURRENTLY: RANGE

R

ANGE

A

BCDEFGHIJKLMN  BKSP

     OPQRSTUVWXYZ    PAGE
     0123456789 ./-  SAVE

 RANGE  AVG  DIAGS ALARM

Summary of Contents for 49i





















































































































































































































































































Reviews:

No comments