Running Protocols
Filling and emptying liquid bottles
44
Thermo Scientific Wellwash Versa User Manual
Thermo Fisher Scientific
7.
Press the
START
button.
8.
The microplate is processed according to the predefined protocol.
9.
Check that the liquid channels work properly during dispensing and
aspiration.
10.
If you need to abort the run, press the
STOP
button during the run.
11.
Remove the plate after the protocol has ended.
12.
Rinse the instrument. Refer to “Rinsing the liquid system” on page
51.
Note
If you use a partial strip plate, make sure that your column/strip
selection matches the physical strips on the plate.
▲
Note
Do not remove the plate before the end of the protocol run.
▲
Note
It is recommended to shut down the Wellwash Versa at the end of
the day. Refer to “Shutting down” on page 109.
▲
1.
Disconnect the liquid bottles and fill or empty them if needed.
Refer to “Liquid level detection” on page 42.
2.
Unscrew the liquid bottle cap and fill with a suitable buffer solution.
3.
Replace the liquid bottle cap and reinstall the liquid or waste bottle.
Refer to “Liquid bottles and channels” on page 22.
4.
Always reprime the system before running a protocol. Refer to
“Priming the system” on page 47.
You can select a protocol using the quick keys or from the protocol list
and start it.
Filling and
emptying liquid
bottles
Starting ready-
made protocols
