Installation
Setups
Thermo Fisher Scientific
Thermo Scientific Wellwash Versa User Manual
21
Figure 2–13.
Fitting the blank wash head onto the left position of the wash
head arm
7.
If you replace the wash head, you must calibrate the wash head.
Refer to “Calibrate current wash head” on page 97.
8.
If you change the wash head to another type, first change the wash
head and then calibrate the wash head.
Install the optional 2x8 / 96 (cell wash) wash head properly onto the
wash head arm (Figure 2–14). Refer to “Installing the wash head(s)” on
page 18.
Note
Check that the brown adapters of the 2x8 cell wash head are
inserted (Figure 2–14).
▲
Note
When you replace the cell wash head adapters (Figure 2–14 A),
change them both at the same time.
▲
Installing the cell wash
head
