Thermo Scientific Wellwash Versa User Manual Download Page 107

Page: 107 / 147

Exporting and Importing

Exporting a protocol as text file

Thermo Fisher Scientific

Thermo Scientific Wellwash Versa User Manual

105

Select

Import

and press the

button.

A list of protocols stored on the USB memory device opens.

Select the protocol you want to import and press the

button.

You can import protocols one at a time.

The protocol is imported to the instrument and it is available in the list

of protocols. It is also possible to import protocols from the Wellwash
instrument.

You can export a protocol as a text file to a USB memory device. The
text file has information about the protocol, such as the name, the steps
and their parameters, modification date, wash head, well type, and well
offset.

Exporting a

protocol as text

file

Summary of Contents for Wellwash Versa




















































































































































Search results

Summary of Contents for Wellwash Versa

Reviews:

Related manuals for Wellwash Versa

Brands by name

Popular brands

Thermo Scientific Wellwash Versa, User Manual

Search results

Summary of Contents for Wellwash Versa

Reviews:

Related manuals for Wellwash Versa

Brands by name

Popular brands