Thermo Scientific STERI-CYCLE i160, User Manual

Page: 18 / 200

Preface
Standards and directives
6
S
TERI-CYCLE
i160
/
i250
Thermo Scientific
Typically, this CO
2
incubator has been designed for being installed and operated in the following areas:
• Laboratories for cytobiological and biotechnological experiments of safety levels L1, L2, and L3
• Medical-microbiological laboratories in accordance with DIN EN 12128
• Research labs in clinics and hospitals
This device is intended for professional use only and must only be operated by trained staff.
Incorrect use
Do not use cell or tissue cultures in the device that are not in accordance with the regulations of safety
levels L1, L2, and L3. Do not use tissues, substances or liquids that:
• Are easily ignitable or explosive,
• release vapors that form combustible or explosive mixtures when exposed to air,
• release poisons.
Standards and directives
The device complies with the following standards and guidelines:
• Low Voltage Directive 2006/95/EC
• IEC 61010-1:2010+Corr. 2011, Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 1: General requirements
• IEC 61010-2-010:2003, Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating
of material
• EMC Directive 2004/108/EC
• IEC 61326-1:2012, Electrical equipment for measurement, control and laboratory use - EMC
requirements, Part 1: General requirements
• FCC 47, Part 15, § 15.107, Measurement 2015, EMC regulation FCC
• FCC 47. Part 15, § 15.109, Measurement 2015, EMC regulation FCC
For other countries, the applicable national regulations are binding.