Thermo Scientific STERI-CYCLE i160, User Manual

Page: 53 / 200

Thermo Scientific
S
TERI-CYCLE
i160
/
i250
4-1
4
Start-up
Adapting the unit to the ambient atmosphere
Preparing the workspace
Upon delivery, the CO
2
incubator is not in a sterile state. Before the initial start-up, the device must be
decontaminated.
Before the decontamination is performed, the following workspace components must be cleaned:
• Support rail
• Shelf support
Table of Contents
• “Adapting the unit to the ambient atmosphere“ on page 4-1
• “Preparing the workspace“ on page 4-1
• “Installing the “MAX” fill level indicator and the pre-filter“ on page 4-2
• “Install the air duct“ on page 4-4
• “Installing the shelf system“ on page 4-7
• “Mount the split inserts (optional) into the STERI-CYCLE i250“ on page 4-9
• “Gas connection“ on page 4-10
• “Power supply connection“ on page 4-15
• “Connecting the USB interface:“ on page 4-16
• “Connecting the alarm contact:“ on page 4-16
CAUTION
Adapting the unit to the ambient atmosphere!
Prior to commissioning allow sufficient time the unit to adapt to the ambient atmosphere.
• Prior to powering up, place the unit for approx. 2 hours in the operating room at the expected
prevailing operating room temperature.
• Open device doors.