Thermo Scientific STERI-CYCLE i160, User Manual

Page: 44 / 200

3
Description of the device
Supply interface
3-14
S
TERI-CYCLE
i160
/
i250
Thermo Scientific
All supply connections are installed in the supply interface (control box) in the rear of the device.
Mounted on the right side ( Figure 3-9 ) of the control box are the connectors for the basic functions of
the unit as well as various optional elements:
1. four connectors to the built-in gas distributor used for the gas monitoring option and for looping
through the CO
2
gas supply to additional units
2. O
2
connector (not available with CO
2
and O
2
/N
2
gas supply sources and simultaneous use of gas
monitoring option)
3. CO
2
connector
4. Label
5. USB interface
6. Alarm contact
7. Power supply connection
Optional interfaces
Figure 3-10. Optional interfaces (left side of control box)
The connectors on the left side ( Figure 3-10 ) are only available with units equipped with the respective
options:
1. four connectors to the built-in gas distributor used for the gas monitoring option and for looping
through the – likewise optional - O
2
gas supply to additional units
2. 4...20 mA interface (option)
3. O
2
connector (option, only available with CO
2
- and O
2
-/N
2
- gas supply sources and simultaneous
use of gas monitoring option)