Thermo Scientific STERI-CYCLE i160 User Manual Download Page 96

Page: 96 / 200

Handling and control

User configuration

6-20

TERI-CYCLE

i160

i250

Thermo Scientific

Figure 6-21.

Date/Time menu

3. For changing the date, choose the

Date

option.

• The input dialog shown in

Figure 6-22

is displayed.

Figure 6-22.

Setting the date

4. To enter the date:

• Press the numeric keys.
• The input numbers are displayed in the input box.

5. To set the cursor to the left to overwrite a value:

• Press the

Backspace

(<<) key.

6. To accept and save the input value:

• Press the

Enter

key.

7. The system returns to the

Date/Time menu

8. For changing the time, choose the

Time

option.

• The input dialog shown in

Figure 6-23

is displayed.

Summary of Contents for STERI-CYCLE i160









































































































































































































Search results

Summary of Contents for STERI-CYCLE i160

Reviews:

Related manuals for STERI-CYCLE i160

Brands by name

Popular brands

Thermo Scientific STERI-CYCLE i160, User Manual

Search results

Summary of Contents for STERI-CYCLE i160

Reviews:

Related manuals for STERI-CYCLE i160

Brands by name

Popular brands