Thermo Scientific SAM12, Manual

Page: 97 / 176

Issue: 1.0 Operating Instructions
Thermo Fisher Scientific SAM12 User Manual 5-57
If the Manual Recount option is
ticked, pressing the START
button after a measurement but
before the door is opened will
initiate a recount. The "Recount
– xx Seconds Remaining"
message is displayed.
See
Options (page 5-6) for more
information regarding Manual
Recount.
Note that QuickScan is disabled
during a recount.
See Options (page 5-6) for more
information regarding
QuickScan.
If the Auto Recount option is ticked - see
Options (page 5-6)
for more information - a recount will automatically be
performed before a result if the following is true:
High Level Alarm > measurement > Normal Alarm
S
ee Alarms (page 5-12) for more information regarding Alarm
settings.
Note that in the following section, the Uncertainty Value or
Activity Result are not displayed. See
Options (page 5-6) for
further information regarding the Alarm displays.
If the ordinary alarm level is
exceeded, the "Normal Alarm"
message will display indicating
that the article is contaminated.
Note that this message is user-
definable, se
e Messages (page 5-
15) fo
r more information.
Also, an alarm will sound for 3
seconds even if the door is
opened.
If the Lock Front Door on Alarm
is set to All Alarms, the door will
be locked and can only be opened
with intervention by an
Administrator.
See
Doors (page 5-13) for more
Recount
Alarms