96
EVOS
™
M5000 Imaging System User Guide
Assemble the
environmental
chamber
1.
Place the incubator chamber on the onstage incubator master plate and secure
it in place using the four 2.0-mm hex screws (indicated by red arrows).
2.
Attach the vessel holder/adaptor to the incubator chamber using the four
thumb screws (indicated by red arrows).
Note:
Place an empty “dummy” culture plate into the vessel holder/adaptor for the
initial warm up and equilibration to prevent build-up of condensation on the optical
components and the inside of the EVOS
™
M5000 Imaging System.
3.
Place the heated glass lid with the no-fog glass window on the incubator
chamber. The heated glass lid is guided and held secure in its place by the two
magnets on its rim.