EVOS
™
M5000 Imaging System User Guide
91
Appendix D: EVOS
™
Onstage Incubator
EVOS
™
Onstage
Incubator
The EVOS
™
Onstage Incubator (Cat. No. AMC1000) is an optional accessory for the
EVOS
™
FL Auto Imaging System that enables the incubation of cells on the
automatic X-Y stage, allowing the capture of images from the same sample over
long periods of time and recording of time lapse movies.
The EVOS
™
Onstage Incubator consists of a Stagetop Environmental Chamber that
is placed on the automatic X-Y stage of the imaging system and a separate Control
Unit that supplies the power and gas (air or air-CO
2
premix, CO
2
-only, and
nitrogen-only). The onstage incubator is controlled by the same software and user
interface that controls the EVOS
™
M5000 Imaging System.
Standard items
included
•
Stagetop Environmental Chamber
•
Control unit
•
Master Stage Plate (also available separately as EVOS
™
Onstage Master Plate,
Cat. No. AMEPVH035)
•
Vessel holder for multi-well plates (also available separately as EVOS
™
Onstage Vessel Holder, Multiwell Plates, Cat. No. AMEPVH028)
•
Cable with 6-pin connector
•
Cable, USB A-to-B, 180 cm/6 ft
•
Heated hose with temperature control, 180 cm/6 ft (also available separately as
EVOS
™
Onstage Incubator Hose, Cat. No. AMEP4728)
•
Gas line, 1/8 in ID, 1/4 in OD (also available separately as EVOS
™
Onstage
Incubator Gas Line, Cat. No. AMEP4732)
•
Push-to-connect gas line adaptor (3 each)
•
Standard-head open-end wrench
•
Hex screw driver
•
Power Cord, Type A (North America)
Note:
A country-specific power cord must be ordered separately in regions not
using the Type A power plug.