62
EVOS
™
M5000 Imaging System User Guide
Adjust objective settings
Assign objectives
After adding a new objective to the objective turret or replacing an older objective,
assign the new objective to the appropriate turret position. For instructions on how
to remove an objective, see “Change the objectives”, page 75.
1.
Go to the
Settings
Objective Selection and Calibration
tab.
2.
Find the newly installed objective in the
Objectives
list for the corresponding
turret position.
3.
Click
Done
.
IMPORTANT!
For best results, calibrate the newly installed objective before using it
in your experiments (see “Calibrate objective magnification”, page 63.