Electronic Controls (Rev 6/98)
30
Selecting CYCLE-SENTRY or
CONTINUOUS MODE
NOTE: The CYCLE-SENTRY icon will appear when
CYCLE-SENTRY mode is selected and the On-Off switch
is ON.
To select CYCLE-SENTRY mode or CONTINUOUS
mode, flip the CYCLE-SENTRY-Continuous switch to the
desired position.
CYCLE-SENTRY Mode
When CYCLE-SENTRY mode is selected, the unit will
start and stop automatically as required to maintain the set-
point, keep the engine warm and keep the battery charged.
CONTINUOUS Mode
When CONTINUOUS mode is selected, the unit must be
preheated and started manually. It will run continuously to
maintain the setpoint and constant airflow.
Viewing Select Key Display Screens
To view select key display screens, press the SELECT key
to view the display screen desired. The value and descrip-
tion of each display screen will be shown in the display. The
display screens appear in the following order shown.
NOTE: Each display screen will be shown in the display
for 10 seconds if no other key is pressed.
[DIS.A] Discharge air temperature
[TPDF]Temperature differential
[COIL] Coil Temperature
[AMB.T] Ambient temperature
[SPR.1] Spare sensor 1
[SPR.2]Spare sensor 2
[BATV] Battery voltage
[RPM] Diesel engine rpm
[DEFI] Defrost interval when not in-range
[DEFN] Defrost interval when in-range
[DDUR] Defrost duration
[MVST] Modulation valve closed on startup
Locking A Display Screen
Pressing the ENTER key will lock the display screen cur-
rently shown in the display. It will then remain on the dis-
play until any other ky is pressed.
Starting The Diesel Engine
NOTE: When CONTINUOUS mode is selected, the diesel
engine must be started manually. When CYCLE-SENTRY
mode is selected, the engine will preheat and start automati-
cally.
1.
Press and hold the Preheat-Start switch in the PRE-
HEAT position for 10 to 90 seconds, depending on
ambient temperature.
2.
Turn the On-Off switch to ON.
3.
Press and hold the Preheat-Start switch in the START
position until the engine starts.
CAUTION: Do not crank the engine for more than
15 seconds at a time.
Summary of Contents for Super II SR+
