![background image](http://html.mh-extra.com/html/thermo-king/super-ii-sr/super-ii-sr_manual_1104381114.webp)
Structural Maintenance (Rev 6/98)
104
Condenser Fan Positioning
1.
Minimum Clearance
2.5 mm (0.10 in.)
after torquing
2.
Taper Hub
3.
Fan Hub
4.
Condenser Fan
5.
Bulkhead
6.
Pulley
7.
Fill Plug must be up
2
1
4
3
5
7
AEA1382
6
EVAPORATOR BLOWER ALIGNMENT
When mounting the evaporator blower assembly on the fan
shaft, the blower and inlet orifice must be properly aligned
for proper air flow and to prevent damage to the blower.
1.
Slide the blower onto the fan shaft.
2.
Shim the inlet orifice to position it 198.1 ± 1.3 mm
(7.8 ± 0.05 in.) from the bulkhead panel.
3.
Center the inlet orifice in the blower orifice. Check the
radial clearance with a 2.3 mm (0.09 in.) gauge wire
and tighten the inlet orifice in position.
4.
Position the blower on the fan shaft so the blower over-
laps the inlet orifice by 2.5 to 3.8 mm (0.10 to 0.15 in.).
Snug the blower hub bolts.
5.
Check the radial clearance by passing the gauge wire
completely around the circumference of the inlet orifice
and blower.
6.
Adjust the inlet orifice as necessary and torque the
blower hub bolts to 18 N•m (13 ft-lb).
Summary of Contents for Super II SR+
