Thermo King SR-2 SmartReefer2, Diagnostic Manual

Page: 322 / 431

Section 6 – SR-2 Service Procedure A04A
Step Action Result Comments
8 Set the time and date to that
shown on the Setup Sheet.
The real time clock is located in
the HMI Control Panel. The time
is supplied to the microprocessor
each time the unit is turned on.
If the microprocessor is changed
the clock setting will be supplied
to the microprocessor when the
unit is turned on. If the HMI
Control Panel is changed the
time and date must be checked
and set if necessary.
9 Press and hold both the EXIT
and unlabelled key for 5
seconds.
The Guarded Access Menu
appears.
If a Security Code is requested
enter the Security Code or [4444]
to enter the Guarded Access
Menu.
10 Press the NEXT key as required
to display the Programmable
Features Menu.
11 Use the NEXT and/or BACK
keys to scroll through all features
in the Programmable Features
Setup Menu.
Set all Programmable Features
to those shown on the Setup
Sheet.
12 When all Programmable
Features have been set press
the EXIT key to return to the
Maintenance Menu.
Page 4
P41RA04A 02 February 2005